Specification
| Model | SpeedyBee Nano 2.4GHz RX | |
|---|---|---|
| Name | ExpressLRS Receiver | |
| Frequency | 2.4GHz | |
| Antenna | T-antenna (56*82mm, 0.6g) | |
| Chip | SX1281+ESP8285 | |
| Power | 100mW (Measured around 170mW) | |
| Input voltage | 5V | |
| Antenna connector | IPEX1 | |
| Weight | 0.7 gram (without antenna) | |
| Dimension | 10.4mm*18mm | |
| Default Firmware | SpeedyBee Nano 2.4GHz RX 3.4.3 | |
Specification
| Model | SpeedyBee Nano 915MHz RX | |
|---|---|---|
| Name | ExpressLRS 915MHz Receiver | |
| Frequency | 915MHz | |
| Antenna | T-antenna (138*104mm, 3g) | |
| Chip | SX1276+ESP8285 | |
| Power | 50mW | |
| Input voltage | 5V | |
| Antenna connector | IPEX1 | |
| Weight | 0.7 gram (without antenna) | |
| Dimension | 11mm*17mm | |
| Default Firmware | SpeedyBee Nano 915MHz RX 3.4.2 | |
Light indicator
| Double red blinking | binding |
| Slow red blinking | powering up but unlinked, no packages received from the transmitter |
| Solid red | receiver is connected, with signal received |
| Fast red flashing | Wi-Fi is turned on, and updating via Wi-Fi is available |
PS.
| To turn on Wi-Fi, wait for 60 seconds after powering on or long press button for 3 seconds |
| Quick to cut off the power 3 times, it enters the binding mode |
Reviews
There are no reviews yet.